Tube expanding machine torque controller TCW-09-PC

Features of TCW-09-PC Torque Controller Fully Solid State Design - no moving parts - no wear and tear of parts - no noise - consequently long life. Uses one main circuit board for easy maintenance. Accurately calibrated digital torque settings with a resolution of 1 watt makes torque settings accurate and can be easily reproduced for identical results. Soft start has been provided for all drives. This feature reduces starting currents in the drive. As a result, life of carbon brushes and drive increases. Connected drive is automatically recognised and indicated by means of LED on the torque controller. Trip time adjustable from ( 0 sec to 10 secs.). Adjustable reverse time from ( 0 sec to 90 secs.). Drive toque adjustable in reverse rotation with surface to set torque. Hand (trigger) mode or foot switch mode, both are available. Expansions can be carried out either in single cycle mode or auto repeat mode. Automatic indication on the display for controllers tripping due to voltage or current fault. Electronic over current protections incorporated for all four drives. Over voltage protection at 275 volts and Under Voltage protection at 180 volts. Supply voltage value displayed during pause time of every auto cycle. Drive current indication given during manual reverse operation. The no. of expansions are stored in the memory and displayed on the panel display at power ON and also whenever the panel is idle.