RS-485 interface module PD3250

This module must only be used to replace defective modules in an existing installation. For new installations, please use PD 840 instead The module contains 16 analog input channels for voltage (0-100 mV) or thermocouple inputs (type R, S, B, J, T, E, K & N) and one Pt-100 input. The module provides internal conversion of voltage measurements into engineering units. In case of thermocouple utilisation, ranging and linearisation are automatically applied. The input signals are filtered, and suppressed against 50 and 60 Hz interference. Supply voltage: 24 V DC. 16 High resolution (15 bit) 0-100mV or Thermocouple inputs Linearisation for Thermocouple types: R,S,B,J,T,E,K & N 1 High resolution (15 bit) Pt-100 input Filtered input signals Suppression of 50 & 60 Hz noise High and Low level limit swich on each channel Advanced self test facility Overload protection P-NET Fieldbus communication Watchdog Timer Rail Mounting module (DIN / EN) EMC Approved (89/336/EEC) The PD 3250 Analog Interface Module (AIM), is one of a collection of distributed process control units, intended for use within a P-NET Fieldbus system. It provides highly a versatile interface for measurement transducers generating analog voltage signals (0 -100 mV), and for a wide range of Thermocouple devices. The PD 3250 provides internal conversion of voltage measurements into any engineering unit representing the analog process being monitored and controlled. In the case of thermocouple utilisation, ranging and linearisation are automatically applied, depending on the particular thermocouple type defined.