Catalyst CCS

The CATALYST CALCINATION SYSTEM (CCS) consists of a bench scale high temperature equipment including: • 2 x Modbus mass flow controllers. Up to 200 Nml/min N2 (He) and 200 Nml/min H2 (standard, option of expanding to up to 3 MFC’s), Hi-Tec Bronkhorst, precision 1% FS, repeatability 0.1%, with process compatible elastomers. DIGITAL Modbus communications. • Provision for Additional gas fed line including shut-off and check valves • Shut-off valves and check-valves (Kalrez elastomer) for each gas line, and turbulent flow gas mixer. • 1/8” Filters at MFC inlet. • Reactor furnace in SS304 for tubular reactors up to 25,4 mm. OD , with radiant ceramic fiber heaters. Maximum temperature 1000ºC ± 2ºC (depending on reactor MOC). Very low thermal inertia (no overshoot) and good temperature distribution. • Top and bottom Adapters for two reactor sizes; 14,3 mm and 19,1 mm. OD • Tubular reactor is not supplied • Insulation box with furnace and layout tubing inside 1/8” High temperature shut-off valves inside the insulation box, installed before and after reactor • Layout inside the insulation box made in SS316 1/8” OD tubing. ¼” OD for exhaust gases • High temperature connector for thermocouple • Reactor temperature control. Pressure and temperature indication inside the box. • Automatic switch-off of gases in the event of any trouble with pressure or temperature