Nitrous oxide gas sensor Dynament Standard Series

Nitrous Oxide Infrared Gas Sensors - Dynament Standard Series Fast Responding IR Sensors for Fixed Gas Safety Monitoring Features • Provides 'raw' signal output for processing external to the sensor • OEM board available containing the necessary processing electronics and LCD display • Internal temperature signal output • Wide operating temperature range of -20 to +50 deg. C The Standard series sensors provide a 'raw' signal output which require the user to provide their own drive electronics and software to derive the gas concentration, apply linearisation and temperature compensation. This can be achieved using the application notes on the downloads tab. The sensors are available in Industrial Ex d IIC Certified, Mining M1 Certified, UL Approved, and Non-Certified versions. The OEM-1 module is available for original equipment manufacturers who do not wish to develop their own electronics and software. The module has an inbuilt display and includes a 4-20mA output. The microcontroller contains all the necessary software and signal processing algorithms to enable the user to minimise the time-to-market. SPECIFICATION Maximum lamp Power Requirements: : 5V d.c. 60mA max. (50% duty cycle source drive) Minimum operating voltage: : 3.0V d.c. (50% duty cycle source drive) Source drive frequency: : 2.0Hz minimum, 3.0 Hz typical, 4.0 Hz maximum Active mV pk-pk output in N2: : 2.2mV typical @ 3Hz, 50% duty cycle Reference mV pk-pk output in N2: : 4.0mV typical @ 3Hz, 50% duty cycle Sensitivity (reduction in active signal) at 20°C, 2Hz, 50% duty cycle: : 20% typical @ 0.5 volume N2O Measuring range: : 0-1% volume N2O Resolution: : 1% of measuring range