video corpo
  • Products
  • Catalogs
  • News & Trends
  • Exhibitions

Mass flow meter
for gasDN100 - 4"DN50 - 2"

Mass flow meter - Q&T Instruments - for gas / DN100 - 4" / DN50 - 2"
Mass flow meter - Q&T Instruments - for gas / DN100 - 4" / DN50 - 2"
Add to favorites
Compare this product

Characteristics

Type
mass
Fluid
for gas
Pipe diameter
DN100 - 4", DN50 - 2", DN15 - 1/2"
Installation
flange, clamp-on, insertion
Material
stainless steel, plastic
Communication
4-20 mA, RS485
Supply voltage
24 Vdc, 220VAC
Protection level
IP65
Applications
industrial, for the petrochemical industry, for gas mixing
Other characteristics
remote
Process temperature

Max.: 220 °C
(428 °F)

Min.: -40 °C
(-40 °F)

Process pressure

1.6 MPa, 2.5 MPa, 4 MPa

Description

Insertion type thermal gas mass flow meter is one of kind mass flow meter which. Is popular in industrial applications is the way they are designed and built. The feature is no moving parts, nearly unobstructed straight through flow path, require no temperature or pressure corrections and retain accuracy over a wide range of flow rates. Straight pipe runs can be reduced by using dual-plate flow conditioning elements and installation is very simple with minimal pipe intrusions. Insertion type thermal gas mass flow meter advantanges : (1)Wide range ratio 1000:1; (2)Large diameter, low flow rate, negligible pressure loss; (3)Direct mass flow measurement without temperature and pressure compensation; (4)Very sensitive for low flow rate measurement; (5)Easy to design and select, easy to install and use; (6)Suitable for all kinds of single or mixed gas flow measurement Could measure gas with flow velocity from 100Nm/s to 0.1Nm/s, which can be used for gas leak detection; (7) The sensor has no moving parts and pressure sensing parts, and is not affected by vibration on the measurement accuracy. It has good seismic performance and high measurement reliability; (8) No pressure loss or very small pressure loss. (9) When measuring the gas flow, it is often expressed in the volume flow unit under the standard state, and the medium temperature/pressure change hardly affects the measured value. If the density is constant in the standard state (that is, the composition is unchanged), it is similar to a mass flow meter; (10) Plug-in installation method, installation and maintenance without stopping production, easy to use and maintain;

VIDEO

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.