Thermal mass flow meter

massfor gasDN100 - 4"

Tri-clamp thermal gas mass flow meter is one of kind mass flow meter which. Is popular in industrial applications is the way they are designed and built. The feature is no moving parts, nearly unobstructed straight through flow path, require no temperature or pressure corrections and retain accuracy over a wide range of flow rates. Straight pipe runs can be reduced by using dual-plate flow conditioning elements and installation is very simple with minimal pipe intrusions. Tri-clamp thermal gas mass flow meter size from DN15~DN100mm. Tri-clamp thermal gas mass flow meter advantanges : (1)Wide range ratio 1000:1; (2)Large diameter, low flow rate, negligible pressure loss; (3)Direct mass flow measurement without temperature and pressure compensation; (4)Very sensitive for low flow rate measurement; (5)Easy to design and select, easy to install and use; (6)Suitable for all kinds of single or mixed gas flow measurement Could measure gas with flow velocity from 100Nm/s to 0.1Nm/s, which can be used for gas leak detection; (7) The sensor has no moving parts and pressure sensing parts, and is not affected by vibration on the measurement accuracy. It has good seismic performance and high measurement reliability; (8) No pressure loss or very small pressure loss. (9) When measuring the gas flow, it is often expressed in the volume flow unit under the standard state, and the medium temperature/pressure change hardly affects the measured value. If the density is constant in the standard state (that is, the composition is unchanged), it is similar to a mass flow meter;