Electric chain hoist SR series

trolley

Series SR 230 V electric chain hoists are available in several designs and they have the same advantages as standard 400V models i.e. safety slip clutch/brake assembly, low construc-tional height etc. For the 1-phase connection, wire having a minimum cross-section of 2.5 mm². For power distribution at building sites, use connection cables of as short as possible to minimize voltage drop. Properties •230VAC, 1 phase, 50Hz, connection is to made using a wire of at least 2.5 mm². •24VAC control voltage including limit switch up and down. •Advanced motors having high thermal load capacities. •Long switch-on periods to facilitate high lifting height. •Maximum safety due to the patented slip clutch/brake assembly. •The brake holds loads at any desired height. •At the top and bottom hook positions, switch-off at limit points is ensured byu a slip clutch. •Mounted with a fixed suspension or combined with a hand-driven trolley. •Load chain (grade 8 in compliance with EN 818/7). Standard delivery •3 m lifting height (maximum distance between top and bottom hook). •1.8 m control cable with push-buttons 24VAC •Includes limit switches. •1 m power cable. •Chain bag. •Trolley not included. Option •Any other hoisting and operating height is also possible. •Larger chain bag. •Radio remote control. •Thermal protection against electrical overload. •Pushing or electric trolleys. •Marking: According to standard, CE-marked •Standard: EN 12100, EN 14492, EN 818-7