Relative pressure transmitter RIB100 series

absolutemembranepiezoresistive

The RIB100 Pressure Transmitter is suitable for general industrial applications and, in a special version, also for the refrigeration and air conditioning sector, for the food industry or for medical gases. This very accurate pressure transmitter with a large number of variants is suitable for many applications. The measuring ranges, the output signals and the process connections can be supplied on specification according to the individual requirement. PRODUCT FEATURES Principle of measurement - Pressure Informations measured - Pressure Detection type - Continuous measurement Explosion protection - Safe zone Pressure type - Relative Sensor type - Piezoresistive silicon sensor Properties of the fluid - Aggressive DETAILS OF THE SIGNAL INPUTS AND OUTPUTS All signal outputs available - 4...20 mA, 0...10 Vdc, 0...5 Vdc Signal Output Type - Current Details of the signal outputs - 4-20mA passive signal on the 24 Vdc power supply circuit. load resistance - 10kΩ (voltage) ELECTRICAL DATA ELECTRICAL DATA Voltage type - 24 Vdc Type of electrical connection - 2-way DIN43650 connector + ground (3 holes) Reverse polarity protection - No Degree of protection - IP65 Max current consumption - 0,02 A Insulation resistance - 100MΩ (50 Vdc) Communication protocol - N/D Communication interface - None Operating voltage - 12...36 Vdc MECHANICAL DATA Process connection type - Threaded GAS(M) Diameter process connection - 1/4" - DN6 Materials in contact with the measured fluid - AISI 316L (1,4404) - Stainless steel Seal materials - NBR - Nitrile Rubber Height - 61,5 mm Width - 26,5 mm Depth - 26,5 mm Case material - AISI 304 (1,435) - Stainless steel