The RIB180 Pressure Transmitter for high temperature is built with a piezoresistive silicon sensor. The sensor is enclosed in a cylindrical cavity filled with liquid and isolated from the measured media by a diaphragm and a stainless steel housing.
The measured fluid is transferred to the sensor through the cooling parts of the heater.
The RIB180 Pressure Transmitter is suitable for general industrial applications and for use with process fluids from the chemical industry.
This very accurate pressure transmitter with a large number of variants is suitable for many applications.
The measuring ranges, the output signals and the process connections can be supplied on specification according to the individual requirement.
PRODUCT FEATURES
Informations measured - Pressure
Detection type - Continuous measurement
Explosion protection - Safe zone
Measurement type - Without contact
Sensor type - Piezoresistive silicon sensor
Construction/Structure - With heat sink for high temperatures
Properties of the fluid - Aggressive
DETAILS OF THE SIGNAL INPUTS AND OUTPUTS
load resistance - 10kΩ (voltage)
ELECTRICAL DATA
Voltage type - 24 Vdc
Reverse polarity protection - No
Max current consumption - 0,02 A
Insulation resistance - 100MΩ (50 Vdc)
Operating voltage - 12...36 Vdc
MECHANICAL DATA
Oil filling - Silicone oil
Impact protection - 100 g
Vibrations resistance - 10g (20...2000 Hz)
Height - 100 mm
Width - 26 mm
Depth - 26 mm
PERFORMANCE DATA
Cycles of measurement - 10000000
Temperature coefficient zero point -
±1,5% Full scale
Temperature coefficient span -
±1,5% Full scale
Naval approvals - None
EMC applied harmonized standards - EN 61326 (For industrial applications)