Sectional warping machine EUROTRONIC-1000-E2

Our Electronic Sectional Warper model EUROTRONIC-1000-E2 is designed to suite all present requirements of the most modern high speed weaving systems. High performance heavy duty fully computerized sectional warping machine. Suitable for warping any natural or manmade yarns as well as their blends in all counts. Working width: up to 5.400 mm Flange Diameter: up to 1.400 mm. Sectional warping Speed: up to 1.000 Mt./min. (to be confirmed for yarns and tension required). Beaming Speed: up to 220 Mt./min. Standard section width: 40mm to 600mm Necessary compressed air: 5 Bar @ 90 LPM Drum is made of lathed steel with 3.14m circumference, perfectly cylindrical and balanced. The drum has 1.000 mm. diameter with fixed cone. Angle on drum cone to be determined for type and thickness yarns to be warped. Quick response disc brakes at both sides of the drum acting through a hydraulic circuit, stopping instantaneously the machine in case of yarn breakage. An electronic variator provides a constant pre-selected speed for both the warping and beaming process to keep a constant tension of the yarn. Speed controlled by PLC system. El urdidor está equipado con 4 ruedas que se deslizan sobre raíles. Dos de ellas son libres y las otras dos tienen movimiento positivo a través de un motor reductor. Moved by means of a servomotor motor through an endless screw with a ratio from 0,001 to 8 mm. Warping table initial and subsequent sections are made automatically and precisely positiones. Warping table comes equipped with a pressure roller to give constant tension and pressure to the building yarn on drum. Section press roll is pneumatic and automatically controlled.