Powder feeding system RP-01

RP-01 Vacuum powder pump operating in HDC technology The RP-01 powder pump is designed to transfer powder paint with the use of low air volume (also powdered enamel). The RP-01 powder pump is applicable both to the transmission of fresh powder in automatic lines, as well as for general transfer of paint from powder tanks This pump is designed to transport large amounts of powdered paint, even over relatively long distances. The individual valves of the powder pump are controlled by a computer control system - PLC. Efficiency with up to 8m of hose - 5kg / min Efficiency at 9-16m of hose - 4kg / min Efficiency at 17-25m of hose 3.5 kg / min • Transports paint over long distances, even with large height differences • Transport of paint with a small amount of air (HDC technology) - • Cleaning the hoses in both directions, ie suction and delivery - • Low operating costs compared to other venturi pumps - • Control from the panel level or integration with the control of the powder center by the ModBus protocol RP-01 Vacuum powder pump with HDC technology Powder pump RP-01 is designed for the delivery of powder paint (also powdered enamel) using very little air. The RP-01 Powder Pump applies both to the transmission of fresh powder in automatic plants, as well as for general transport of paint from powder tanks This pump was designed to transport large volumes of powdered paint, even at relatively large distances. The individual valves of the powder pump are controlled by a computer control system - PLC.