Thermostatic test chamber SM-1000-CC-FB

temperatureEuropean standards-compliantfor battery

Main features for SM-1000-CC-FB: 1. Working volume（mm）: 1000 W x 1000 H x 1000 D (1000L); 2. Temperature range: -40℃ to +180℃; 3. Heating/cooling rate: 3℃ / 1.5℃; 4. Temperature uniformity: ±1.5℃ to ±2.0℃; 5. We don't suggest to go with humidity function but if you need this function to be added,as long as your flammable solids no need to go with powering cable,that will be available (cause the humidity with water moisture will lead to short circuit when powering on inside the chamber); 6. Compressor: "Taikang" /Bizter semi-hermatic (Germany made); 7.Made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying. 8.With larger transparent viewing window and lighting inside to observe the test. 9.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently 10.Powerful multi-wing type air circulation 11.Door seal adopts silicone rubber material 12.Standard configuration with one test hole on the left side of the chamber 13.With various of safety protection device Optional safty device: A:Pressure relief port (to release the over-pressure gas produced inside the chamber); B: Explosion proof chains (to protect the operators from door explosion just in case); C:Smoke sensor (to detect the smoke inside the chamber and active CO2 fire extinguishing system); D:Rare gas detector and exhaust valve (to detect gases such as CO/H2 and up to 30+ types and exhaust valve to activate ventilation and exhaust the gas to outside); E:Dupont insulating painting at insides walls (to prevent electrical short circuit); F).CCTV monitor (to monitor the live status inside the chamber);