Profile roll forming machine EPM 25

Universal machine for entry-level users or as a backup machine for onsite work to produce double standing seam profiles 25 from short, conical or pointed panels or sheet material in two passes. The least expensive profile shaping machine model Ideal choice for short, conical or pointed panels Minimum panel length 200 mm (depending on the material) Smallest axial dimension 50 mm Produces single-sided profiles quickly and flexibly Low weight and minimal dimensions Easy to transport using transport handles TECHNICAL INFORMATION Supply voltage - 230 V / 50 Hz / 1 Ph. Drive power - 1.1 kW Working speed - 8,5 m/min Forming stages - 7 stations Shortest panel length - 250 mm Infeed height - 870 mm Processable materials - Titanium zinc up to 0.8 mm Copper up to 0.8 mm Aluminium up to 0.8 mm Sheet steel (galvanized and coated) up to 0.7 mm Stainless steel up to 0.5 mm Dimensions (L x W x H) - 950 / 1,250 mm x 600 mm x 1,070 mm Weight - 180 kg DIMENSIONS STANDING SEAM 25 a) Axial Dimension The corresponding strip widths result in the following profile dimension fort he profile height 25 b) Covering Width During installation, the resulting covering widths must be considered c) Variants The following profiles can be manufactured on the machine ACCESSORIES GUIDEBOY Additional material guide for single-sided profile shaping of panels. The installation of the guideboy on any of the Schlebach profile shaping machine infeed guides requires little effort. The Guideboy prevents the sheet material from shifting towards the centre of the machine during single-sided profile shaping operations.