Crimping module Uni-S

The Uni-S is the latest generation crimp applicators for use in both automatic and semi-automatic benchtop crimping machines. Banded terminals of open or closed barrel construction with either metal or plastic carriers can easily be processed. •Economically priced applicators to handle practically all terminal and feed types •Rugged construction and simple set up to ensure long life and high quality results •Includes convenient micro-adjust dials, a 6-digit counter and one additional set of tooling •For use on automatic terminating machines as well as benchtop crimping presses Application Range The Uni-S family of applicators are designed for use with side- and end-feed, banded terminals of open or closed barrel construction. Handling and set up is as easy as ever. The Uni-S is suitable for use on automatic wire processing systems as well as on benchtop presses for terminals with either metal, plastic or Mylar tape carrier strips. •Open barrel terminals on metal carrier strips, with or without weather seals •Pre-insulated terminals on plastic or Mylar tape carrier strips •Front, middle or center carrier strips •Insulated end ferrules in strip form •Open barrel end ferrules (clips) in strip form •Wire splice terminals Technical Data Feed Type Mechanical or pneumatic Stroke 40 and 30 mm (1.57 or 1.18") (Other strokes available on request) Conductor Cross-Section 0.08 – 6 mm2 (28 – 10 AWG) Terminal Pitch Minimum: 1 00 (0.04") / Maximum: 30 mm (1.18”) (pneumatic feed recommended for 25 mm (1“) or more) Crimp Height Adjustment Increment: 0.025 mm (0.001”) , Maximum: 1.5 mm (0.06”) Compressed Air Connection 6 – 8 bar (90 – 110 psi)