Qseven® carrier board Carrier-Q7-D03

Carrier Board for Qseven® and μQseven® Rev 2.1 Modules in embedded NUC™ Form factor Video Interfaces LVDS Dual Channel 24-bit + backlight connector HDMI® connector Mass Storage microSD Slot Networking 1 x Gigabit Ethernet connectors 1 x Mini-PCIe Slot for WWAN Modem Modules, connected to on-board microSIM slot Usb 1 x USB 2.0 Host port on Type-A socket 1 x USB 3.0 Host ports on Type-A socket shared with USB 2.0 OTG Client 1 x USB 2.0 OTG port on micro-AB socket shared with USB 3.0 Host 1 x USB 2.0 Host port on internal connector 1 x USB 2.0 Host port on M.2 Socket 1 KeyE Slot 1 x USB 2.0 Host port on mini-PCIe Slot Pci 1 x PCIe x1 lane on M.2 Socket 1 Key E Slot 1 x PCIe x1 lane on Mini-PCIe Slot Audio Optional combo TRSS audio connector Mic in/Stereo out Serial Ports - Optional 4-wires RS-232 / RS-422 / RS-485 configurable serial port on pin header Other Interfaces - Optional 1 x CAN port on pin header 1 x PCIe x1 lane on M.2 Socket 1 Key E Slot 1 x PCIe x1 lane on Mini-PCIe Slot 1 x 40 pin connector for I2C, SPI and General Purpose I/O, pinout compatible with the Raspberry Pi - GPIO Connector 1 x LED driver connector 4-wires FAN connector configurable microSIM Slot for miniPCIe Modem Debug USB port on micro-AB socket MFG connector for JTAG programming of Qseven® module Power Supply 12VDC through USB Type-C connector Coin cell battery Holder for CMOS and RTC Operating Temperature - 0°C ÷ +70°C * Dimensions - embedded NUC™ compliant: 101.6 x101.6 mm (4”x4”)