CONTROL UNIT WITH PWM OUTPUT
Centralized control unit for thermal solar panels.
Equipped with 3 relay outputs (2 for loads + 1 for alarm), PWM output, 0..10V output and 3 inputs (sensors), can configure and manage up to 6 different types of solar systems.
When a specific installation is selected, the control unit automatically manages the outputs and inputs used to control the valves, the pumps, the integrative sources and the probes used in the type of installation selected.
Moreover on the backlit LCD display it is possible to visualize the hydraulic diagram of the installation set up, the state of the outputs, the probes as well as several other data and informations.
TECHNICAL FEATURES
Power supply: 230V~ 50Hz
Power absorption: <2 VA
Sensors type: 3 x NTC 10K @ 25 °C ±1 %
Sensor operating range: -50 °C .. +200 °C (collector) - -50 °C .. +110 °C (boiler)
Temperature reading range: -20 °C .. 180 °C
Accuracy: ±2 °C
Resolution: 0,1°C (-20°C .. 144,9°C) - 1°C (145°C .. 180°C)
Offset adjustment: on S1: ±5.0°C - on S2: ±5.0°C - on S3: ±5.0°C
Installer Password: 0000 .. 9999 (default 0000)
Acoustic Signal: On/Off (default On)
Backlight timing: 20 sec from last keypress
OUT2 Relay Logic: NOR=N.O. REV=N.C. (default N.O.)
Contacts rating:
OUT 1 relay: 2 x 2(1)A max 250V~ (SPST) Voltage free
OUT 2 relay: 8(1)A max 250V~(SPST) Voltage free
Alarm relay contacts rating: 4(1)A max 250V~ (SPDT) Voltage free
Output Signal:
PWM:
Amplitude: 10V +-15%
Frequency: 1KHz
Current: 15mA max.
0..10V:
Amplitude: 0V..10V ±10%@10V
Minimum load: 10KOhm.