Remote control unit Z-PASS2-RT-S

Z-PASS2-RT-S is a high-performance multifunction controller that combines PLC functionality with routing and remote access. It is in fact based on StratON softPLC with an integrated web server, VPN, and 4G LTE modem/router with GPS/Glonass functionality. Equipped with 2 Fast Ethernet ports (1 LAN port, 1 WAN port), 3 serial ports, and 1 USB host 2.0 port, Z-PASS2-RT-S supports ModBUS TCP Server, ModBUS RTU Master/Slave, FTP/SFTP Server, HTTP/HTTPS Server, OpenVPN, SSL, IoT protocols (MQTT, OPC UA, HTTP post) and optional Energy Management protocols (IEC 60870-101, IEC 60870-104, IEC 61850). The controller has 6 configurable general-purpose digital channels and 2 analog inputs. The device is configurable via Z-NET4, web server, and programmable in IEC 61131-2 environment. It also makes use of 512 MB RAM, 4 GB Flash Memory, and a Micro SD slot up to 32 GB. Integrated into LET'S telecare and remote control platform, Z-PASS2-RT-S can support Point-To-Point-Telecontrol or Single LAN Telecontrol connections. The device complies with the most stringent cybersecurity standards starting from compliance to penetration test conducted according to OWASP, NIST 800-115, Risk Analysis, and IEC62443. Power supply - 11..40 Vdc Max. power consumption - 11 W Max insulation - 1.5 kVac LED status indicators - Power supply Run I/O status VPN status VPN connection RX/TX serial communication Link/Ethernet traffic 4G/LTE level Registered modem Data connection GPS Battery Modem power supply Protection class - IP20 Connections - 3.5 mm pitch removable terminal block, cable cross-section 1.5 mm2 IDC10 power supply/communication bus connector Flash Memory (data) - ≥4 GB RAM - 512 MB