Construction truck-mounted concrete pump 100 m³/h, max. 35.1 m | ZENITH 5Z35

Pump model Zenith 5Z35 is the suitable choice as far as flexibility, dynamism and reliability are concerned. Thanks to the boom with 5 sections with “Z” folding type this model is suitable for jobsites both big and small, works inside galleries, viaducts, bridges and under bridges. The pump has a minimum boom opening of 6,6 m only and pipeline Ø 125 mm so as to be the ideal solution for city areas with difficult access thanks to front stabilization “X” type. In particular the pump can easily operate also in the historical centres thanks to the perfect assembly on truck with 3 axles with wheelbase 3.600 mm – 3.900 mm. The pumping group with opening circuit is very reliable. One typologies of “S” valve group from 100 m³/h and pressures till to 61 bar. Main Features Self supporting frame at high torsional absorption calculated with Method of Finished Elements Assembly on 3 axles chassis Hydraulically separated controlled stabilization: front "X" type outriggers, rear sliding lateral type outriggers Boom 5 sections, "Z" opening type and pipeline Ø 125 mm. (5”) on 1st and 2nd section, Ø 100 mm. (4") on 3rd - 4th - 5th section Boom control by proportional distributor Boom Minimum opening space 6.650 mm. Concrete Capacity adjuster at distance Valve S8 at high performances till 100 m³/h. continuous, silent, regular pumping Total mass 26 t. Proportional remote control with engine start up and emergency stop Emergency remote control with serial cable