Solar radiation sensor with temperature sensor 3S-SR-T-I/U

analog output

This Irradiation Sensor is used to measure the radiation flux density of Solar PV Plants having an Analog Input Datalogger. Besides Irridiation Sensor, it includes also an Internal Module Temperature Sensor. It is supplied along with Mounting Bracket and Cable. MODE OF OPERATION A silicon solar cell can be used as an irradiance sensor, because the short-circuit current is proportional to irradiance. Our sensors are built out of a monocrystalline solar cell connected to a shunt. Due to the low resistance of the shunt the cell operates next to short circuit. The temperature coefficient of the short-circuit current creates a small error. The compensation is realized by using a specific temperature sensor laminated to the rear side of the solar cell. The measuring signals of short- circuit current of the cell and the resistance value of the temperature sensor are measured by a micro controller. The calculated values of irradiance and temperature given onto a 4-20mA or 0-10V with customer specification protocol. The electronic circuit is optimized for low power consumption. MECHANICAL CONSTRUCTION The solar cell is embedded in Ethylene- Vinyl- Acetate (EVA) between glass and Tedlar. Plain integration into the top cover of the box Advanced weatherproof junction box made of UV resistant material with cable gland and screw-less terminal for the connection of the measuring cable, therefore, the sensor construction is comparable to that of a standard PV module. The electrical connection is realized by a 3m cable.