Slide table ES 80120

The ES is designed to facilitate the use of the linear ball bearing. The obtainable stroke depends on the allowed deflection of the shafts with respect to their length, to their diameter and to the considered load, as well as the relative position of the elements composing on it. It can be used with mobile shafts (according to drawings), or with fixed ones. These elements are manufactured for shafts with a diameter from 6 to 80 mm. Design The ball-bearing supports and shaft supports are made of grey cast iron, ground on all sides. Precision The distance between the shafts is constant within 5 μ m. The parallelism between the fixing bases and the shafts is guaranteed to 10 μ m, according to the quality of the chosen shafts and ball bearings. Product Designation - ES 80120 Outer diameter D - 0 Inner diameter d - 0 Dynamic factor Y - 0.000000 Diameter pins PB G - 10 Diameter Counterbore W - 20 Diameter screw slot V - 13 Diameter frontal hole PB t - 10 Diameter frontal hole PR T - 18 Diameter shaft hole d - 80 Diameter bearing holes D - 120 Difference height PB-PR Y - 3 Center distance pin PB A - 368 Center distance shaft holes C - 258 Center distance screw PB B - 140 Center distance srew-pins (width) PR N - 110 Center distance srew-pins (length) PR M - 132 Height F - 145 Total height unit H - 148 Height shaft holes K - 74 Width L - 400 Length bar holder PB - 55 Length bearing holder PR - 176 Material - GG Depth Counterbore U - 14