Slide table EC 4060

The coordinated standard ballbearing table is designed to allow 2 crossed movements at 90°. It is based on the same principle as the ES-1; the ballbearing support has two times 2 borings for the ball bearings. Design The ball-bearing support and the 4 shaft supports are made of grey cast iron, ground on all sides. Precision The distance between the shafts is constant within 5 µm. The parallelism between the fixing bases and the shafts is within 10 µm, depending on the quality of the chosen shafts and ball bearings. Perpendicularity is 10 µm per 100 mm. Product Designation - EC 4060 Outer diameter D - 0 Inner diameter d - 0 Dynamic factor Y - 0.000000 Diameter pins PB G - 8 Diameter Counterbore W - 15 Diameter screw slot V - 8.5 Diameter frontal hole PB t - 6 Diameter frontal hole PR T - 12 Diameter shaft hole d - 40 Diameter bearing holes D - 60 Difference height PB-PR Y - 2 Center distance pin PB A - 164 Center distance shaft holes C - 110 Center distance bearing holes in height X - 62 Center distance screw PB B - 54 Height F - 82 Height PRC HC - 142 Total height unit H - 146 Height shaft holes K - 42 Width L - 190 Length bar holder PB - 30 Material - GG Depth Counterbore U - 10