Laser distance sensor SLA-3 series

for bending machien protection Characteristics: Floating installation to provide full protection - Class 1 laser source, can detect dia.4mm object and vibration deviation allowed - Double safety outputs, redundancy circuit design - EDM function, can monitor dual valve - Miniaturization and remarkable scale, simple mounting - Can save alignment time with the auxiliary device - Simple adjustment with the dimming mode - Three operating modes: “flat bending mode”,“box bending mode”,“special mode”,can process workpiece into different shapes - Fast speed close allowed to have the max. productivity - Comply with EN 61496-1/-2 (Type 4)，EN ISO 13849 (Cat.4 PL e) Parameters: Safety level - PL e EN ISO 13849-1 Protection category - III Light source - class 1 laser 635nm Resolution - ≤1.5mrad Input Voltage - DC24V ±10% Power consumption - <5W Response time - <5ms Safety output - PNP*2，cross check, short protection ON：(loading current)≤120mA OFF：(current lose)≤1mA,(remain volt)≤1V Sealing level - IP65 Environment - EN 60068-2-78 Operation temperature - -10～+50℃ Storage temperature - -40～+85℃ Anti-light interference - 10000Lux (angle of incidence ≥5°) Anti-vibration - frequency：10-55Hz,amplitude：0.35mm Anti-impulse - 15g,16ms,1000 times at X,Y,Z axis Standards - EN 61496-1 EN 61496-2 EN 60529 EN ISO 13849-1 EN 60825-1 GB 7247.1 GB 28243