CO2 laser power supply HY-ES80

AC/DCPWMCE

HY-ES80 Laser power supply is used for 60W,80W Cutting and Engraving Acrylic, Fabric, Double Color Sheet and Rubber,ect. • Good compatibility:ES80 Power Supply is special designed for EFR 80w Laser tubes.Also can driver 40w,50w.60w common Laser tubes from other factories. • High Voltage Power Supply: Input AC 220V or AC 110V Voltage ,Max output DC 35KV. • You can choose Cutting Type or Sculpring Type; the Cutting Type has a good power stability and strong adaptability; the Sculpring Type has a quick response speed and good engraving effect. • This Power Supply has the” TEST” button which can test output laser manually. • Easy Control: The start and stop of laser can be easily controlled by TTL level.Both 0-5V analog signal and PWM signal can control the laser power. • The Laser power supply has output open circuit protection. when the earth connection is under good situation, Power can be short time work in open state, it Can avoid the Laser tube burst damage caused by Laser power supply, prolong the EFR Laser tubes service life. • This Laser power supply has TTL signal indication, water through signal indication and laser output indication. • The power has feedback interface, can be used for closed-loop control, also can be used for testing the Laser tube working current. • It can quickly judge Laser tube is damaged or Laser power supply is damaged at the scene, greatly facilitate the on-site maintenance.