Hot-melt glue dispensing machine PB series

Glue Machine Category : Commonly Used Industrial Equipment/Parts Equipment work flow： The machine can be divided into two main parts, the power control system and the heating system. The heating system includes hydraulic system, and pneumatic power. The heat preservation method is to cover the rubber storage bucket with double glass fiber around and at the bottom, which can reduce the heat absorbed by the mechanical surface and avoid the user being scalded. Fixation of the hot melt adhesive in the special structure of the molten plastic barrels in quickly melted into liquid flow to glue at the bottom of the barrel, gathered in the glue at the bottom of barrels of double-acting piston pump or pump around, stay on the piston pump or pump cylinder or motor work, hot melt adhesive of the molten melt will be inside the suction pump, at the same time also be squeezed through the heating plate to glue road plate, were then flows through the filter device, and then flow file a rubber plate, By heat preservation pipe or guide hose to nozzle group device or hot melt glue gun, spray hot melt glue by these devices will be available for use. PB-Robatech-C5 Series Glue Machine Equipment function 1. After starting the device, first heat the hot melt glue in the melting cylinder to the set temperature. After reaching the set temperature, continue to heat the melting cylinder within the set waiting time, and then the heating pipe and spray gun can be heated simultaneously. The heating and heating sequence can prevent the expansion of hot melt adhesive from producing excessive peak adhesive pressure during heating and heating.