Blind rivet bolt LTFH/LTFHS series

cylindrical headstainless steel

Thin sheet studs are for sheets as thin as .020 inches / 0.51 mm. They may also be used in thicker sheets where flush head studs are not required. LTFH studs are installed in the sheets in the same manner as flush-head studs; however different punches and anvils are required. Producing high intensity; Self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances. LTFH (non-flush) Studs are for sheets as thin as 0.51mm. They may also be used in thicker sheets where flush head studs are not required. LTFH studs are installed in the sheets in the same manner as flush-head studs; however, different punches and anvils are required. When installed, the LTFH stud will be securely locked into the thin sheet with ample torque-out and pushout resistances. The stud head will not be flush but will project above the sheet surface approximately 0.64mm. Non-flush for sheets as thin as 0.51mm.