Sheet extrusion line LFT－D

for thermoplasticsmulti-stage

Full name：Long Fiber reinforced Thermoplastics production line Model：LFT－D Characteristic： For small size prdoucts:630T、800T、1000T For middle size prdoucts：1500T、2000T For large size prdoucts：2500T、3000T、4000T Types of extruder range from HPL40～HPL95;output ranges from 200KG～2400Kg/h 1. Eliminating processing semi products, reducing the cost of raw materials It’s reported, LFT-D molding technology in the production of large structure parts is 40% ~ 50% cheaper than GMT materials pressing molding parts, and 30% ~ 40% cheaper than LFT-G pellet injection molded parts. 2. Shorter processing period, which improve the production efficiency Traditional thermoplastic composite molding firstly process basic resin and glass fiber composite into sheet metal pellets or semi-finished products, and LFT - D production line reduce the step of processing semi-finished production, and the polymer only need one heating process, which reduce the effect of heating on the properties of the polymer. 3.Lower scrap rate Recycle waste on line and reuse ; 4. 100% scrap recycling LFT-D waste recovery system crushed the waste into pellets and be feed into the twin screw extruder by loss-in-weight feeder, maximum recycling waste can reach 15% of the output, and no any bad influence on the performance of product. This is not only to achieve the waste recycling, but also to ensure 100% waste free green production; 5. More flexible product design The type, length, content of the fiber, and the composition and formulation of the matrix resin can be adjusted