Pneumatic gripper GGD series

parallelotherfor bottles

The GGD pneumatic gripper tube is intended for handling short and close-necked bottles. For this purpose, it consists of an inflatable air jack which only inflates in the lower part. This gripper is attached to an automatic or semi-automatic palletizer robot for (de)palletizing glass bottles by layer. User / use Bottling: (De)palletization of bottles Bottle manufacturers: Palletization of bottles General industry: (de)palletization of various containers (plastic containers, cardboard containers, hollow glass, PET…) Technical characteristics The GGD gripper tube is manufactured with a vulcanised rubber substrate which resists abrasion and withstands high pressures. The maximum recommended operating pressure is 1.2 bar. The standard GGD pneumatic gripper tube is equipped with 3 fasteners positioned 510 mm from the centre fastener and a supply hose with a coupler for connection to a source of compressed air. The standard length of the GGD gripper is 1340 mm for European pallets and 1470 mm for US pallets. Performance The GGD gripper tube has the distinctive feature of having a thickness under vacuum of several millimetres to be able to be inserted between the necks of bottles with a very small footprint. It comes in a “flat” version for small diameters, because it is intended for small format bottles with short and close necks. Several lengths, 1340 mm or 1470 mm, can be supplied with 2 air supplies and different non-standard centre distances. It is equipped with a low fabric reinforcement which gives it better abrasion resistance. Composition The GGD pneumatic gripper tube is divided into 3 areas: Inflatable body 3 attachment points