Spray atomizing nozzle ZMIN series

compressed airfor liquidsnickel-plated brass

- With or without metal hose - For thing liquids - Minimal lubrication/fine atomizing The compact, economical atomizer, or "The micro-fine oil film“" This atomizer has a simple construction for dependable function. With its compact design (95 x 35 x 32 mm) it fits into just about any space, even if things get tight. All good things come from above: The oil is not suctioned, but fed in from the top. Thus, very little air is needed. An oil shut-off valve is installed inside the atomizer. As soon as the atomizer receives compressed air, the oil valve opens up and the dosed oil is applied simultaneously. The minimal-atomizer ZMIN has a built-in fluid shut-off valve. It only switches to flow when compressed air is actually available and blocks the fluid infeed immediately when the compressed air is interrupted. This simplifies control, because a reaction only takes place in dependence of the compressed air, e.g. via our 3/2 way valve (see below). The fluid is simply fed in from above (e.g. through the connection with the container). So the ZMIN can operate with very little air. The spray pattern can be adjusted on the atomizer and the fluid inductor. The more atomized air, the finer the droplets. ZMIN Measuring example for fluid volumes, 1 min. at 20 °C : ISOVG150 - - 0.9 ml at 5.5 bar/atomized air 50 % open - - 1.0 ml at 5.5 bar/atomized air 100 % open - - Water - - 42 ml at 5.5 bar/atomized air 50 % open - - 54 ml at 5.5 bar/atomized air 100 % open