Explosion-proof solenoid interlock Ex AZM 415 series

• Ex zone 1 and 21 • Special version up to +90 °C ambient temperature for dust Ex zone 21 available (HU) • Spring-to-lock or power-to-lock principle • Problem-free opening of stressed doors by means of bell-crank system • High locking force 3500 N • Ball catch • Wiring compartment • Attention: Please state required international approvals with your order! Applied standards EN 60947-5-1, EN ISO 14119, EN IEC 60079-0, EN 60079-1, EN IEC 60079-7, EN 60079-18, EN 60079-31, EN ISO 13849-1 Enclosure aluminium die-cast, enamel finish Cover aluminium, enamel finish Actuator metal zinc Switch type type 2 Coding level low coding Tightening torque cover screws: 0.5 … 0.6 Nm switch inserts M3 screw connection terminals: min. 0.6 Nm Degree of protection IP67 (IEC/EN 60529); Ex AZM 415-TE, TEI, -FE: IP64 (IEC/EN 60529) B10d (10 % load) 2 million TM max. 20 years Switch insert 2 x Ex 95 Contact material silver Switching system slow action, positive break NC contacts A Switching elements 1 NC/1 NO contact + 1 NC/1 NO contact or 2 NC + 1 NC/1 NO contact Connection screw connection terminals Cable cross-section min. 0.2 mm² (AWG 24), max. 1.5 mm² (AWG 16) Cable entry 2 x M20 x 1.5 Clamping range 7 … 12 mm Rated impulse withstand voltage Uimp 4 kV Rated insulation voltage Ui 250 V Conventional thermal current Ithe 6 A Utilisation category AC-15; DC-13 Rated operating current/voltage Ie/Ue enabling/signalling contacts: 6 A/250 VAC; 0.25 A/230 VDC; direct-current solenoid: 0.08 A / 24 VDC ±10 % Short-circuit protection 6 A gG/gN fuse; direct-current solenoid: 2 A (slow blow) Power consumption max. 12 W (250 ms) Ambient temperature T6: –20 °C … +40 °C;