Process water purification unit OneClean

Clever solutions for recycling and cleaning water and abrasive A sustainable and cost-saving investment Whoever says ‘abrasive waterjet cutting‘ should also say ‘abrasive desludging’. When cutting with abrasive sand at high performance, a not to be underestimated amount of waste material is produced whose disposal can quickly become a challenge. Particularly in a multi-shift cutting operation, the need for clever and efficient solutions for separating water and abrasive arises here. As part of the STM modular system, we offer an additional module system for abrasive flushing in the abrasive cutting process. The STM BasicClean and STM OneClean abrasive rinsing systems take over fully automated cleaning of the water-abrasive mixture during and after the cutting process. The advantages cannot be denied: With the STM OneClean modules, water and abrasive can not only be separated, but also cleaned to a large extent and reused for the cutting process. This sustainably reduces operating costs and also promotes environmental awareness, which is playing an increasingly important role in the industry. The STM OneClean as well as OneClean+ are systems for abrasive application based on the modular principle. This is because the abrasive rinsing modules can be individually combined and supplemented here. The STM BasicClean and STM BasicClean+, a suitable entry-level model, provide the entry-level in the field of abrasive desludging. This abrasive removal system is the economical entry into efficient abrasive removal for waterjet cutting systems and offers a fully automatic, space-saving abrasive removal system for collecting the settled abrasive sand.