Desiccant compressed air dryer

heatless adsorption

Heatless Adsorption Air Dryer Rated working pressure: 0.6-1.0Mpa Air dew point: -40℃ (0.7MPa) Ambient temperature: ≤45℃ Description: Heatless Adsorption Air Dryer uses the principle of pressure swing adsorption to make the dryer adsorb under the pressure of the pipe network, and then desorb at the atmospheric pressure, and draw bac Working principle: Heatless Adsorption Air Dryeruses the principle of pressure swing adsorption to make the dryer adsorb under the pressure of the pipe network, and then desorb at the atmospheric pressure, and draw back about 12-14% of the dried product gas from the dryer outlet. The desiccant is further purified and regenerated. The two towers alternate the above process to provide dry compressed air to the gas point. Standard technical parameters: 1. Rated intake air temperature: ≤40℃ 2. Rated working pressure: 0.6-1.0Mpa 3. Ambient temperature: ≤45℃ 4. Air dew point: -40℃ (0.7MPa) (customization is accepted below -60℃) 5. Air consumption for regeneration: 12-14% 6. Pressure loss: ≤0.02MPa 7. Air intake oil content: <0.1mg/m³ 8. Installation method: indoor, no foundation, leveling of the concrete floor, reserved maintenance operation space 9. Adsorbent: activated alumina, molecular sieve 10. Power supply: 220-1PH-50HZ 11. Users can optionally configure customized products Design Features: 1. Short-period adsorption cycle, isothermal operation, preservation of adsorption heat, good natural desorption effect 2. Fully electronic programmable controller, friendly man-machine interface, automatic continuous display of double tower working conditions