Heating element thermal protector 60 - 180 °C, ø 10 mm | N01, NK1, N02

Automatic resetting, with two solid non insulated connection wires either vertical or horizontal Contact type: normally closed Nominal switching temperature (NST) in steps of 5 °C: 60 °C - 180 °C Standard tolerance: ± 5K Reset temperature range below NST (UL / CSA): -35 K ± 15 K Operating voltage AC / DC - available, values on inquiry: up to 500 V ~ Rated voltage UAC: 250 V (VDE) 277 V (UL) Rated current AC cos φ = 1.0 (ohmic load) / switching cycles: 2.5 A / 10,000 6.3 A / 3,000 7.5 A / 300 Rated current AC cos φ = 0.6 acc. to IEC 60730-2-9 / switching cycles: 1.6 A / 10,000 Rated current AC cos φ = 0.4 - 0.5 acc. to IEC 60730-2-3 / switching cycles: 1.8 A / 10,000 Max. switching current at 250V ~ / cos φ = 0.4 - 0.5 / switching cycles: 7.2 A / 1,000 Contact bounce time: < 1 ms Contact resistance (acc. to MIL-Std. R 5757): < 50 mΩ Impregnation resistance with- or without resin (acc. to requirements)*: suitable Vibration proof at 10 60 Hz: 100 m/s² Pressure stability of housing *: 450 N Suitable for protection class I or II: suitable Standard wiring connection: single wire 0.5 mm Diameter Ød [mm]: 10.0 mm Heigth h [mm]: 3.4 mm Length of Pin lp [mm]: 14.0 mm / 20.0 mm Approvals available (according to design): IEC; ENEC; VDE; UL; CSA; CQC