Surface temperature measurement temperature sensor PR25+ active

thermocouplewith housing4-20 mA

Contact sensor with connection cable and aluminum prism for temperature measurement (cold or hot water) on pipes and other suitable surfaces. • Application/type : Cable sensor, Surface sensor • Purpose : Measure values • Measured values : temperature • Interface : Active, 0..5 V, 0..10 V, 4..20 mA • Configuration : jumper • Sensor : SI-Protection against permeation of humidity and mechanical stress (e.g. vibration) • Output voltage : 0..10 V or 0..5 V, adjustable via jumper, min. load 5 kΩ • Output current : 4..20 mA, max. load 500 Ω • Operating range temperature (°C) : -50..+180 • Operating ranges temperature (°C) : -50..+180 • Output signal temperature : scaling analogue output, 0..+160 °C (default setting), selectable from 4 temperature ranges -50..+50 | -20..+80 | -15..+35 | -10..+120 | 0..+50 | 0..+100 | 0..+160 | 0..+250 °C, adjustable at the transducer • Operating range humidity : max. 85% rH short term condensation • Accuracy temperature : ±0,5 K (typ. at 21 °C), within default measuring range, depending on length of connection wire, potentiometer for offset adjustment • Power supply : 15..24 V = (±10%) SELV, 24 V ~ (±10%) SELV • Power consumption : typ. 0,4 W (24 V =), max. 0,5 W (24 V =), 0,8 VA (24 V ~) • Material in touch with media : Sensor probe, Ø=11/15 mm, aluminium, hex pressed (IP65) • Installation length (mm) : 28 • Enclosure : USE-S, impact- and shock-resistant enclosure with quick-release cover, PC • Colour : pure white • Protection (IP) : IP65, according to EN 60529 • Connection : removable cable entry flextherm M20 for wire Ø=4,5..9 mm, removable plug-in terminal, max. 2,5 mm²