Thermocouple AF25+ RS485 Modbus

strap-on0-10 VRS-485

Contact sensor in the USE enclosure with connection cable and brass lug for surface temperature measurement (cold or hot water) on pipes and other curved surfaces. • Application/type : Contact sensor, Cable sensor • Purpose : Measure values • Measured values : temperature • Interface : RS485 Modbus, Active, 0..5 V, 0..10 V • Configuration : USEapp, uConfig, BUS • Sensor : SI-Protection against permeation of humidity and mechanical stress (e.g. vibration) • Output voltage : 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 5 kΩ, min. load 10 kΩ • Network technology : RS485 Modbus • Data transmission : RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit) • Operating range temperature (°C) : -50..+135 • Operating ranges temperature (°C) : -50..+135 • Output signal temperature : scaling analogue output, 0..+160 °C (default setting), selectable from 4 temperature ranges -50..+50 | -20..+80 | -15..+35 | -10..+120 | 0..+50 | 0..+100 | 0..+160 | 0..+250 °C, optionally configurable • Operating range humidity : max. 85% rH short term condensation • Accuracy temperature : ±0,5 K (typ. at 21 °C), within default measuring range, offset setting via app or uConfig • Power supply : 15..35 V = SELV, 19..29 V ~ SELV • Power consumption : max. 2,5 W (24 V =), 4,3 VA (24 V ~) • Material in touch with media : Sensor probe, Ø=6 mm, brass, with contact tongue, 16-point pressed (IP65) • Installation length (mm) : 35 • Display : LCD 29x35 mm, RGB backlight, with traffic light function, threshold values configurable, optionally configurable via app or uConfig