Manual torque multiplier MDNF-10

MDNF series torque multiplier is a manual torque multiplier，It is divided into flat type and bevel type, both of them can enable the operator to use a small input torque to achieve the effect of a large output torque Product Features ● Suitable for occasions where space is limited and external power sources cannot be used ● High-efficiency planetary gear sets input small torque and output large torque ● The torque multiplier output torque accuracy is plus or minus 5% ● Made of special steel, long service life ● The reaction arm of the plate multiplier can adjust the position of the force cylinder according to the working conditions ● Special special reaction arm can be selected according to user requirements Operation 1. The following equipment is required to operate the torque multiplier: (1) Powerplant or advanced impact socket (2) Reaction arm (3) Manual torque wrench 2. Operation precautions (1) When the torque wrench is manually operated, the reaction arm is rotated and placed in the opposite direction of the output operation, and a solid right-angle flat surface is found to lock the bolt, as shown in the figure, when the standard reaction arm is not suitable for the existing In the working environment, please make special orders according to the actual working conditions. (2) When operating, do not exceed the use range of the reaction arm. For special applications or extended sleeves, a standard arm must be used, which can be extended but cannot exceed the operating range. Violating the restrictions on the use of the reaction arm will cause wear and tear or damage the multiplier output device, as shown in the figure