*mydirectindustry

Type 2 surge arrester Vigivolt V2T-30
for transient current protectionvaristorDIN rail

Type 2 surge arrester - Vigivolt V2T-30 - Toscano Linea Electronica - for transient current protection / varistor / DIN rail

Add to favorites

Compare this product

Characteristics

Type

type 2

Applications

for transient current protection

Other characteristics

varistor, DIN rail, single-phase

Voltage

Max.: 2,000 V

Min.: 0 V

Primary current

Max.: 60,000 A

Min.: 0 A

15,000 A, 20,000 A

Description

Transient surge protection device, caused by atmospheric discharges, switching maneuvers in electrical circuits and electrostatic discharge. The device incorporates protection with GAS discharger to avoid possible current leakage to ground due to varistor wearing out. It avoids the damages that these transient surges can cause to the equipment powered from this supply. This device DOES NOT PROTECT AGAINST PERMANENT OVERVOLTAGE. Nominal voltage (Un): 230 VAC (L/N) Maximum voltage (Uc): 320 VAC (L/N) Frequency: 50-60 Hz Maximum discharge current 8/20µs L/N (Imax): 30kA Nominal discharge current 8/20µs L/N (In): 15kA Maximum discharge current 8/20µs N/PE (Imax): 60kA Nominal discharge current 8/20µs N/PE (In): 20kA Protection level L/N (Up): <1.5 kV Protection level N/PE (Up): <1.5 kV Overvoltage response time: ≤25 ns Previous protection fuse: 100A gL Maximum cable section in terminals: 16 mm²