video corpo

Type 2 surge arrester Vigivolt V3T-15
for transient current protectionvaristorgas discharge tube

Type 2 surge arrester - Vigivolt V3T-15 - Toscano Linea Electronica - for transient current protection / varistor / gas discharge tube
Type 2 surge arrester - Vigivolt V3T-15 - Toscano Linea Electronica - for transient current protection / varistor / gas discharge tube
Add to favorites
Compare this product
 

Characteristics

Type
type 2
Applications
for transient current protection
Other characteristics
varistor, gas discharge tube
Voltage

Max.: 2,000 V

Min.: 0 V

Primary current

Max.: 15,000 A

Min.: 0 A

8,000 A, 10,000 A

Description

Transient surge protection device, caused by atmospheric discharges, switching maneuvers in electrical circuits and electrostatic discharge. The device incorporates protection with GAS discharger to avoid possible current leakage to ground due to varistor wearing out. It avoids the damages that these transient surges can cause to the equipment powered from this supply. This device DOES NOT PROTECT AGAINST PERMANENT OVERVOLTAGE. Nominal voltage (Un): 230 VAC (L/N) Maximum voltage (Uc): 320 VAC (L/N) Frequency: 50-60 Hz Maximum discharge current 8/20µs L/N (Imax): 15kA Nominal discharge current 8/20µs L/N (In): 8kA Maximum discharge current 8/20µs N/PE (Imax): 15kA Nominal discharge current 8/20µs N/PE (In): 10kA Protection level L/N (Up): <1.5 kV Protection level N/PE (Up): <1.5 kV Overvoltage response time: ≤25 ns Previous protection fuse: 63A gL Maximum cable section in terminals: 16 mm² Temperature range: -40º…+80º C

Catalogs

No catalogs are available for this product.

See all of Toscano Linea Electronica‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.