Servo-assisted solenoid valve 50.005.126

2-wayfor potable waterfor hot water

2/2-way solenoid servo-controlled valve of DN 5 in bistable version, for the control of potable water. The valve is especially suitable for use in electronically controlled, battery driven sanitary fittings. The power consumption is minimised by the use of impulse control (pwm) to increase long term performance, durability and battery life. The flow rate of the cartridge valve has been optimized in such a way, that the nominal diameter of DN 5 fulfils the standard requirements for sanitary tap ware. A wide range of connection options can be realised through the valve body. There is no need to create a mounting contour, as is the case with a cartridge valve. Applications Automatic faucets Sanitary fittings Pilot system for valves with a larger nominal diameter Characteristics Servo-controlled Pre-tested functional unit Geeignet zur thermischen wie auch chemischen Desinfektion Optimized water hammer characteristic by low noise emission according to EN 60730 Low power consumption, suitable for battery operation Technical data Construction 2/2-way; single chamber straight valve; servo-controlled; mode of operation servo-controlled Fitting position any Media Cold and heated potable water and physically and chemically similar media Flow factor Kv 9,5 l/min @ 1 bar (completely open) Pressure surge according to EN 60730 according to EN 15091 (5l/min) Burst pressure according to EN 60730 Durability according to ASME A112.18.1-2018 Nominal power 1,4 W at nominal voltage Insulation class B according to EN 60730 Protection Class III according to EN 60730