3-roll plate bending machine UHST-3 Line

conical

UHST-3 Line - Plate Bending Machines Standards & Advantages of UHST-3 "• High efficiency on heavy plate bending operation • Reduced overall dimensions and easiness of transportation on medium and big machines • Having the two bottom rolls horizontally moving, means also a lower working height which requires a smaller foundation pit and less anchoring load (in the smallest models you don’t need foundation) • During operation (pre-bending and bending phases), the plate always keeps its horizontal position. So material move more easily • The solid construction and the particular geometry of the UHST-3 enable to be used as a press brake bending machine • The UHST-3 machine can fulfill the best pre-bending on every required diameter. • The posibility to reduce centre-distance between lower rolls realizes a better pre-bending during bending of tubes with small diameter and thickness " "• Another important feature of the UHST-3 machine is the operating system of the top forming roll. In fact, the top forming roll can be used as a traditional press brake allowing perfect rerolling and calibration operations of the produced tubes • In the same way it is also possible to obtain cones with heavy thickness by bending in several strokes the plate • With some 3 and 4 rolls pyramidal machines it is necessary to tilt the top roll to allow the produced tube removal. On the UHST-3 machine this is not necessary and therefore it is much more easier to remove the finished tube