Calorimetric flow transmitter Flex-Fin

volumefor liquidscompact

Flow switch / transmitter for small flows Combination with temperature switch or transmitter possible No moving parts in the medium being measured Only one medium-contact material ● Flow switch / transmitter for small flows ● Combination with temperature switch or transmitter possible ● No moving parts in the medium being measured ● Only one medium-contact material ● Simple to use ● Low pressure loss ● Various nominal widths ● Short response times for a calorimetric sensor ● Linearised and temperature compensated ● Simultaneous measurement of flow and temperature is possible Characteristics The FLEX-FIN flow sensor monitors fluid media. Its compact form combines the measurement tube and converter / counter which, depending on the model, trigger an adjustable limit value with transistor output or an analog output (4..20 mA or 0..10 V) or both. In addition, the limit switch can alternatively be replaced by a frequency output or a Pulse output. The converter / counter record two process parameters: the flow speed of the medium and its temperature. Both parameters can be assigned to the analog output or to the switching output. Handling and operation Installation In order to ensure the sensor's maximum insensitivity to interference, the flow should run from bottom to top (best degassing even at the slowest flow speed). Standard crimp connectors, hoses with crush protection, or the crimp connectors provided by HONSBERG can be used for the connection. The insulation hoses offer the best possible insulation against the surroundings, and must therefore not be removed.