From £3.12 per m2, per coat
Ideal for Industrial environments and garages
Easy application and clean up
Virtually odourless water-based formulation
Tough formula takes heavy traffic
Watco Basics Epoxy Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.
Epoxy Resin Floor Paint recommended areas of use
Concrete floors in warehouses
Production areas
Garages
Showrooms
Application
Surface preparation
Clean and prepare bare concrete using Watco Bio-D. This will remove grease and oil deposits from existing paint.
If over coating existing paint, please ensure it is well bonded. Remove any flaking or poorly bonded paint using a floor scraper for smaller areas or hire a grinder for larger areas. Smooth, glossy paint should be lightly abraded to provide a key.
Make sure the surface is clean and dust free before continuing.
New concrete should be at least 2 months old.
This paint is water-based, so it doesn’t matter if the floor remains slightly damp after cleaning.
Repair
Holes in excess of 5mm deep can be filled with Watco Basics Floor Repair Mortar, or providing the floor is level, Watco Pourable Repair Mortar.