Repair mortar Flowpatch Deep Fill

for concrete

When you need a pourable repair for a deeper concrete hole For holes between 10-200mm Just add water, mix and pour Fibre reinforced for added strength Forklift traffic in just 2 hours Watco Flowpatch Deep Fill® is ideal for repairing or levelling deeper holes between 10-200mm in concrete flooring. Its very strong formula will harden quickly and will accept heavy traffic including forklifts only 2 hours after application. Recommended areas of use Ideal for filling deep holes between 10-200mm For quick patch repair on concrete, use Watco Flowpatch® For repairs to ramps, steps and for reforming edges, we recommend Watco Concrex® For resurfacing or levelling larger areas of rough or tamped concrete, please use Watco Flowtop® Features Just add water, mix and pour Can be applied to damp (not wet) concrete Sets at low temperatures (down to 5°C) Flowpatch Deep Fill® can be applied from 10mm to 200mm Light grey, slip resistant finish Odourless, non-toxic, non-hazardous formula Fibre reinforced Application Mixing Mix the water at the following ratio: 1kg of powder to 100ml of water. Due to the short working life of the mixed product, we recommend you carry out the mixing near to the repair and not near to the water source. Put the water into the empty bucket and gradually add the powder stirring constantly to achieve a pourable slurry. Application When a smooth consistency is achieved, simply pour it in to the hole. Working time Approximately 5 to 10 minutes at 20°C, so do not mix at one time more than you can use within a few minutes.