Chemical protection coating Grip Flex

for metalfor concretefor wood

A flexible slip resistant coating ideal for areas subject to movement or vibration Flexible polyaspartic coating Excellent slip resistance in wet and oily conditions Ideal for steps, mezzanine or close to vibrating machinery Watco Safety Grip Flex, a tough, flexible polyaspartic coating, designed to provide a safe surface both inside and out. Just one coat minimises the risks of accidents throughout the workplace, particularly for wet or oily areas which may be subject to movement, such as metal or wooden ramps or around vibrating machinery. Recommended areas of use Slippery, hazardous, wet or oily areas Around vibrating machinery Steps, Ramps/ Disabled Ramps, Foot Bridges Loading Bays, Walkways and Entrance Ways Car Parks Application Surface preparation Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow the surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry. New Concrete – as a guide, new concrete should be left for 8 weeks to dry. The surface should then be prepared using Watco Etch & Clean, thoroughly rinsed and left to dry. Priming – is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer.