Hydraulic lifting system

for tank

Technical data for 12 t hydraulic jacking system 1.pump station Maximum pressure:25MPa - Power:11KW Rated oil flow:60L/min - Motor rotate speed:1470r/min oil tank capacity:360L - System temperature :20-60ºC oil filter precision:20υm - Voltage:220W System oil type:L-HM46# antiwear hydraulic oil - Total weight:360Kg Outsize(mm): 1100*750*1000 - 2.Jacks theory lifting capacity:125KN - Rated lift capacity:120KN rated oil pressure:12MPa - Hydraulic stroke:100±0.5mm Glissade capacity:≤5mm - weight:≤20Kg Installation size for up and down chuck: settle 3 *14U hole on the circumference of a φ120 circle Size(mm):160*160*490 - Suitable lifting rod:φ30round steel(45#) - chuck device: screw mechanism - 3.Jack support Total height:4460mm (will be confirmed after design) - Lifting rod height:3900mm Slider stroke:3630mm (will be confirmed after design) - distance between expansion loop support to ground:310mm - Principle of the 12t hydraulic jacks system Principle of the erection system The following short description gives the working procedure in outline. It can in certain details be modified when required. Step 1. The tank bottom - plates are placed on the prepared foundation and welded together. Step 2. The beams or lattice work of the roof are assembled and finally joined to the upper rim of the shell ring. Step 3. The jacking equipment is installed in the tank. The plates of the second shell ring (next to the top ring) are positioned outside the first one.