φ19mm*11.5mm standard OEM pressure sensor
●Application
Process control
Hydraulic system
Construction condition
Diaphragm material
SS 316L
Housing material
SS 316L
Pin Wire
Gold-plated karaf /100mm silicone rubber wire
Back pressure tube
SS 316L (gauge and negative pressure only)
Seal ring
Nitrile rubber
Electrical Condition
Power supply
≤2.0 mA
Impedance input
3kΩ-6 kΩ
Impedance output
3kΩ-6 kΩ
Response
(10%~90%):<1ms
Insulation resistance
100MΩ,100V DC
Overpressure
2times FS, ( 0C/0B/0A/02 5times FS)
Environmental Condition
Media applicability
Fluid which has no corrosion on stainless steel and nitrile rubber
Shock
No change at 10gRMS,(20~2000)Hz
Impact
100g,11ms
Position effects
Deviate 90° from any direction, zero change≤±0.05%FS
Basic Condition
Environment temperature
(25±1)℃
Humidity
(50%±10%)RH
Atmospheric pressure
(86~106) kPa
Power supply
(1.5±0.0015)mA DC
All tests are in accordance with relevant national standards, including GB / T2423-2008, GB / T8170-2008, GJB150.17A-2009, etc., and also comply with the Company'