Angular position sensor ANX Series

non-contactmagneticHall effect

AN8 Sensors Description Non-contact, intrinsically linear contact angle position sensors. The sensors operate through the use of Hall Effect technology with magnetic fields generated by permanent magnets. They provide a linear change in voltage output (ratiometric to the input voltage) corresponding to an angular rotation of the input shaft Features Angular position sensor with high tolerance for misalignment Non-contact angular position sensing and full 360⁰ rotation Custom programming available for: angle range, slope, PWM output, custom magnets – contact factory No mechanical interface means no parts to wear out or jam Available with Delphi connector or 12” (305 mm) wire leads RoHS compliant IP67 Maximum air gap of 5.5 mm (0.22”)* Typical Applications Implement (fork lift, agricultural trailer hitch, etc.) position sensing Steer, throttle by wire Gear selection Zero-contact encoder alternative Replacement for smart bearings Outboard trim sensing Environmental Specifications Vibration 6g sinusoidal, 8 g RMS axial; 40Hz – 2 kHz all 3 axes Operating Temperature -40 °C to 125 °C (-40 °F to 257 °F) with Delphi connectors, -40 °C to 150 °C (-40 °F to 302 °F) with wire leadsStorage Temperature -40 °C to 150 °C (-40 °F to 302 °F) Ingress Protection IP67 Electrical Specifications Input Voltage 5.0 VDC ± 10% Output Voltage 10% to 90% of input (see graph for voltage vs. rotation angle characteristics) Input Current 14 mA typ., 16 mA max. Output Current -8 mA to 8 mAOutput Accuarcy ±3.5% Output Linearity ±3.5% Maximum Overvoltage 16 VDC Absolute Max. Output Current ±30 mA Output Type Analog (PWM available)