Hydraulic press Yz27-1250T

formingstampingbending

This series of hydraulic presses are double-action sheet drawing hydraulic presses, especially suitable for the drawing, flanging, bending, and stamping processes of metal sheet parts. It can also be used for general pressing processes. The stamping processing method uses a mold to form a flat blank into an open hollow part during the stretch-forming process. Working Conditions 1)Ambient temperature: -5℃～45℃。 2)Relative humidity: ≤85%, No condensation. 3)Running Ability: Support 24-hour continuous production 4)Power supply: 320-520V, 60/50HZ TN-S 5)Air Supply: Dg15mm, 0.4~0.6Mpa. 6)Water Supply: Water Pressure 0.2~0.3Mpa, Cooling Water≤30℃, CL of cooling water＜25ppm. Total Power: Around 200HP. Main Body The design of the whole machine adopts computer optimization design and analyzes with finite elements. The strength and rigidity of the equipment are good, and the appearance is good. All welded parts of the machine body are welded by high-quality steel mill Q345B steel plate, which is welded with carbon dioxide to ensure the welding quality. The upper beam, lower beam, slider, and side beams are welded by steel plates. Confirm that the welds are free of bubbles and welding cracks. Anneal after welding to eliminate welding stress. The sliding block is guided by four corner and octagonal guide rails, and the column rods are 45# forgings, which have been normalized. The contact surface between the guide rail and the sliding block is made of copper material, which has good wear resistance, long service life, and high adjustment accuracy, and the sliding block runs smoothly without jitter.