*mydirectindustry

Aluminum alloy sheet metal
for aerospace applications

Add to favorites

Compare this product

Characteristics

Shape

sheet metal

Other characteristics

for aerospace applications

Thickness

0.55 mm, 3.5 mm
(0.022 in, 0.138 in)

Max.: 4 mm
(0.157 in)

Min.: 0.3 mm
(0.012 in)

Width

Max.: 2,600 mm
(102.36 in)

Min.: 1,000 mm
(39.37 in)

Mechanical resistance

565,000,000 Pa
(81,946.3 psi)

Max.: 595,000,000 Pa
(86,297.5 psi)

Min.: 480,000,000 Pa
(69,618.1 psi)

Elasticity

495,000,000 Pa
(71,793.7 psi)

Max.: 510,000,000 Pa
(73,969.2 psi)

Min.: 400,000,000 Pa
(58,015.1 psi)

Description

7A04 T6 Aluminum Alloy Sheet for Aerospace Alloy: 7A04 Temper:T6 thickness: 0.55mm-4.0mm width: 1000mm-2600mm surface: mill finish or at request standard: GB/T3880 、EN485、ASTM B209 Product Description 7A04 aluminum alloy is the most commonly used super-durable aluminum, a high-strength alloy that can be strengthened by heat treatment. 7A04 aluminum sheet is usually used under the condition of quenched artificial aging. At this time, the strength is much higher than that of general duralumin, but the plasticity is lower. Extruded semi-finished products and aluminum clad plates that are not too thick in cross section have good corrosion resistance and tend to have stress concentration. The spot weldability is good, the gas welding is poor, the machinability is good after the heat treatment, and the annealing state is low. SPECIFICATION 7A04 T6 aluminum alloy plate: Regular thickness range: 0.3-4mm Regular width range: 1000-2600mm * Remarks: Specific requirement of alloy, temper or specification can be discussed at your request.