Aalborg electric pumps

Flow: 6, 1, 15 l/min
Length: 180, 165 mm
Width: 230, 160 mm

Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Protection category IP55. Pump body in brass, gears in bronze ...

Flow: 35, 40, 50 l/min
Head: 55, 46, 38 m
Power: 0.6, 0.52, 0.37 kW

... - Continuous duty ENGINE - Two-Pole induction motor (n = 2850 min-1) - Insulation Class F - Protection IP 44 MATERIALS - Pump body: Cast Iron - Motor Support: ...

... centrifugal pump is based on the conversion of electrical energy into mechanical energy, which is then used to move liquids through pipes or tubes. The pump consists of an electric motor, ...

Flow: 1,000 m³/h
Head: 120 m
Power: 250 kW

... plastic pumps Based on innovative strength and over 60 years of expertise in the use of thermoplastics, we have set a new milestone in the shape of a future-oriented, efficient and reliable pump system.It ...

Power: 1.13 ch - 3 ch

... or system requires a pump and many require additional accessories. TorqLite offers several different options for both electric and air consoles to power hydraulic wrenches. We provide ...

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single-stage horizontal centrifugal pump, single, in conformity to EN 22858 / ISO 2858 standards Sold either with unfitted ...

Flow: 0 m³/h - 7,000 m³/h
Power: 255 kW

... Centrifugal Pumps with axial suction, single stage, with high resistance bearings for horizontal axis, great robustness, and tangential drive flange. The horizontal pump RN is designed ...

Flow: 7 l/h
Pressure: max 0.3 bar

... Tiny footprints Description The EDS03 is a plunger pump. Spring-loaded valves on the intake and output side allow the pump to aspirate easily during operation. It is possible to operate the pump ...

Flow: 50 us gal/min - 750 us gal/min
Pressure: 3.4 bar - 15.4 bar

... facilities. • Operation run test as per NFPA 20. • Drivers: Electric motor drive or diesel engine drive. • Electrical testing capabilities for motors and controllers ...

Flow: 0.9 m³/h - 420 m³/h
Head: 0 m - 642 m

... incorporation of the pump unit is simplifi ed by the linear position of stub pipes in the hermetic jacket space requirement is minimized due to compact design standardized design of the connections ...

Flow: 0 l/min - 25 l/min
Pressure: 0 Pa - 2,000,000 Pa

The Yamada air-powered pump is a reciprocating type pump that is driven by compressed air. The pump consists of an air motor section to drive the pump ...

Flow: 13.5 l/min
Pressure: 2,750 bar

... psi pulse free pressure gauge Ef burst disc 75 kW (100 hp) L+ pole, foot mounted electric motor Boost pump, 10 Ef 1 micron water filters, heavy duty suction line hose with non- corrosive ...

Flow: 1,100 m³/h
Pressure: 10, 16 bar
Head: 150 m

Optional: with heavy duty bearing for PN16. Materials : Cast Iron, Ductile Iron, Bronze, Cast Steel, SS304, SS316, Duplex SS Flange : PN10/ PN 16 Applications : HVAC and Cooling Tower Fire Protection and Fire Fighting Marine ...

... consisting of Water Pumps, Thermostats, Thermostat Kits, Switches & Sensors, Coolant Flanges and Radiator Caps. In the quest to reduce engine emissions, there is a growing trend among ...

Monoblock monostage centrifugal pumps with closed impeller Max flow m³/h 500 Max pressure bar 10

Pressure: 8.5 bar

Pump at pressures up to 125 psi (8.5 bar) with the L/S High-Performance pump head and the included L/S 16HP high-pressure tubing Easy-to-use precision drives offer precise speed control and digital display ...

Flow: 5 l/min - 20 l/min

TPS-5——TPS-20 Voltage:120/260V Frequency:50/60Hz Power:5-18W AirFlow：5-20L/min

Flow: 19 ft³/min
Pressure: 80 psi

... gallon drum). Ensure that the drum pump is securely attached to the drum. Next, turn the knob of the Drum Storm counterclockwise. In less than 2 minutes, a high-powered vacuum fills up the drum. The ...

Flow: 1,080 m³/h
Head: 16 m
Power: 11 kW - 30 kW

Vertical pump with external electric motor for flushing Multi-channel open impeller. Suction inlet: 250 mm Discharge outlet: 250 mm

Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants

Flow: 43 m³/h
Input diameter: 65 mm
Output diameter: 65 mm

... winery. Lowmotion 2.5 belongs to the range of industrial pump Lowmotion. Its fast priming facilitates its use. The pump is delivered ready for use. TECHNICAL CHARACTERISTICS Touch screen Electric ...

Flow: 0.01125 l/s - 0.1998 l/s
Pressure: 520 psi

... simple and virtually maintenance-free approach to accurate chemical feed. Pumps can run dry without pump failure. Rate of injection is manually adjustable, but only while pump is stopped, ...

Flow: 0 l/h - 1,000 l/h
Pressure: 8 bar

... Stroke adjustment while running or steady Standard micrometric manual adjustment 1mm per turn Optional electric actuator, 4-20 mA or 0-10 V command with manual override Optional motor ...

... Peristaltic Pumps provide highly accurate and repeatable flow rates and are extremely easy to use. High Accuracy These pumps have the same high quality micro-stepping motor that creates ...

Flow: 38 l/min
Power: 250 W
Length: 132 mm

Electric centrifugal pump with high-quality, impact-resistant plastic housing. Description For diesel, heating oil EL/L, radiator antifreeze (concentrate), GTL, HVO and R33 Self-priming with integrated ...