AIGNEP ball valves

The Air Saver device, made up of a motorised ball valve and a programmable timer, installs at tank outlet and can be programmed to open automatically just before work begins and shut down right after ...

DN: 12.7 mm - 203.2 mm
Pressure: 1.6 MPa - 2.5 MPa
Temperature: 0 °F - 366 °F

China Wafer Pattern Ball Valve Manufacturer Shinjo Supplies Wafer Pattern Ball Valve

DN: 6 mm - 100 mm
Pressure: 14, 16, 18, 40 bar

* Ball valve made of brass * Full port design * Female threaded acc. to DIN ISO 228 * Lever Handle (red) * Marking according to DIN EN 19 * Blow-out proof stem with double O-ring ...

... will feature a new Proportional Directional Valve System. This system will replace the original CMX valve system on the T450, T455, T685, TXD, and T130 series of drilling rigs. The new proportional ...

DN: 0.25 in - 8 in
Pressure: 45, 180 bar
Temperature: 140 °C

Ball valve - 1/4" - TF VABS 1/4 The TF-VABS ball valves have been exclusively designed and manufactured for refrigerating systems operating with all refrigerant fluids ...

DN: 43 mm - 60 mm

... - In the corrosion test,the bottom metal dosen't have any sings of corrosion. ◆ - Discharge speed 30 feet/second when the valve is open.

DN: 20 mm
Pressure: 1 bar - 38 bar
Temperature: -196 °C - 120 °C

... Divertor Valves are constructed from stainless steel and has brass-made inner parts. This valve is approved for operating in air gases, vapors and cryogenic liquefied gases. It also uses a PN50 flange ...

DN: 0.25 in - 4 in
Pressure: 40, 32, 25 bar
Temperature: -10 °C - 120 °C

• Full bore • Body, ball and socket hot stamped chrome plated brass OT58 • PTFE seats - O ring EPDM • Handle and nut chrome plated steel • Double o-ring stem anti leakage technology • Chrome plated stem with nut • ...

DN: 100 mm - 300 mm
Pressure: 102 bar
Temperature: 60 °C

... HBC 975 is a safety device, also called slam-shut valve, suitable to quickly interrupt the flow of a gas when the pressure existing in the control point reaches the set calibration value. It is a valve ...

DN: 13 mm - 45 mm
Pressure: 2,500 Pa
Temperature: 0 °C - 90 °C

BRASS BALL VALVES [Technical Specification] Standard Bore Thread Connections Comply With ISO228 Material Standard brass ; CW617N; DZR Working Pressure PN25 or 2.5Mpa Seal ...

DN: 40 mm - 80 mm
Pressure: 16 bar
Temperature: 130 °C

... is a float valve for horizontal installation inside a tank as inlet valve with outlet at the bottom. This valve is made entirely of stainless steel featuring excellent corrosion resistance. ...

ThreadNPT FlowFull ConnectionsFxF ApplicationGas Stem configurationPacking Gland HandleLever BodyBrass ProductBall Valve Size 1/4" - 4'

Top Line Ball Valves are engineered to be the finest in the industry. Each valve is built to exacting specifications and is constructed to perform flawlessly in the most hostile environment. ...

DN: 15 mm - 600 mm

... ● Locking devices optional on 1⁄2– 6"" (15–150 mm) valves (SB-600 up to 4"" (100 mm)). ● Air vent on all balls. ● Fire safe to API 607, BS 6755: 1) Body gasket SS 316 and graphite (standard); 2) Ball ...

DN: 20 mm - 150 mm

Product Desciption: Specs: DN20-150，1″-6″ Standard：DIN、SMS、ISO Material：SUS304、SUS316L Application：beer ，Dairy Industry，beverages，pharmaceutical 2.Working principle: Specs: DN20-150，1″-6″ Standard：DIN、SMS、ISO Material：SUS304、SUS316L Application：beer ...

DN: 2 in - 24 in
Temperature: -29 °C - 200 °C

... Trunnion Ball Valve Temperature: - Normal Temperature Trademark: - SOLID Transport Package: - Plywood Case Type: - Trunnion Ball Valve Trunnion mounted ...

... Vacuum (Pressure) Ball Valve Description: Guq series pneumatic vacuum (pressure) ball valve is applicable to connect or cut off the medium flow in the pipeline in ...

DN: 20 mm - 25 mm
Pressure: 13 bar
Temperature: -30 °C - 80 °C

... quickl valve can be installed in the piping and some important position such as outlet of compressor and upstream of pneumatic tools .Good for the separation ,adjustment and maintenance . Quick install . Provide ...

DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

Series B1 consists of wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accordance with the severe product standards and the quality management ...

DN: 1.5 in
Pressure: 16 bar
Temperature: -40 °C - 250 °C

The Perolo ND40 ATCO FULL BORE self-contained ball valve is designed to be used as an air inlet or as a fluid inlet/outlet valve. With its MAWP of 16 bars, this valve ...

Pressure: -1 bar - 20 bar
Temperature: -20 °C - 80 °C

Mini ball valves - 5600 series Areas of application : compressed air, oil, water Technical features - chrome-nickel plated brass body - ball sealings : PTFE - nylon 66 handle - ...

DN: 0.25 in
Pressure: 414 bar
Temperature: -40 °C - 93 °C

316 SS, BF Series Ball Valve, CNG fast-fill, PEEK Seats, 1/4 Female NPT, 6000psig(414bar), -40°F to 200°F(-40°C to 93°C), 0.75 Cv, 3-way, 90° actuation, Low-temperature Service Body Material316 Stainless ...

DN: 20 mm - 63 mm
Pressure: 10 bar

... Unplasticized polyvinyl chloride (PVC-U). • Hydraulic test complying with EN 917 : Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leak tightness.

DN: 0.5 in - 8 in
Pressure: 0.5 bar

Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar.

DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C